Manufacturer's Description:
DESCRIPTION
Center power feeds are used to bring power to a Wall MonoRail system when the junction box cannot be located directly behind the rail. The center power feed can be used anywhere within the run with 12' of field-cuttable softwire leads and includes an LED transformer that converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Wall MonoRail low-voltage lighting system.It can power lamps totaling up to 60 watts. The transformer, concealed by a decorative canopy, fits in junction box andfeatures a fast acting secondary circuit breaker that will safely turn the system off should a short occur. Once the short has been removed the unit can be reset by simply flipping the wall switch off and back on.
INSTALLATION
This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (notincluded). Rail is installed through the power feed on the canopy to bring power to the run.
DIMMING
Dimmable with a