Manufacturer's Description:
This single-feed surface transformer converts standard 120 line voltage to12 volts to provide the necessary voltage for powering a Monorail low-voltage lighting
SYSTEM
. It can power
LAMP
s totaling up to 300 watts. The transformer is concealed inside a decorative housing with a fast acting secondary circuit breaker that will safely turn the
SYSTEM
off should a short occur. Once the short has been removed the breaker can be reset.
INSTALLATION
This product can mount to either a 4” square electrical box with round plastering or an octagon electrical box (not included). Rail is installed through the power feed on the canopy to bring power to the run.
DIMMING
Dimmable with a 600 watt low-voltage magnetic dimmer. The dimmer is placed on the line side of the transformer. (Consult dimmer manufacturer for specifics).This surface transformer includes a preinstalled debuzzing
DIMMING
coil to reduce audible noise when using a low-voltage dimmer.
FINISH
Antique bronze, polished nickel, satin nickel. COMPATIBLE RIGID STANDOFFS The shortest rigid standoff that can be used with this surface transformer is the4” rigid standoff (sold separately). If dropping the rail more than 4” below the ceiling, order the desired rigid standoff length and one compatible power extender (sold separately).OPTIONS This surface transformer may be plugged in with the addition of a Plug Option, a 16 foot cord with inline switch two feet from the plug (sold separately).REQUIRED USAGE12 volt transformers require the use of 12 volt
LAMP
s.
WEIGHT
11.50 lb./5.23 kg. ±