Manufacturer's Description:
This remote magnetic transformer converts standard 120 volt line-voltage to12 volts, providing the necessary voltage for powering a MonoRail lighting
SYSTEM
. This remote magnetic transformer can be used to power
LAMP
s totaling up to 150 watts. This transformer is equipped with fast-acting secondary circuit breaker that will safely turn off the
SYSTEM
should a short occur. Once the short has been removed the breaker can be reset.
INSTALLATION
This transformer must be installed in a remote but accessible location (such as above the ceiling or in a closet). To simplify
INSTALLATION
the transformer should be located no more than 20 feet from the run or power feed. The electrician will need to supply the proper gauge conductor from the transformer to the power feed location based on distance (see Low-Voltage Wire Size Table, below).
DIMMING
Dimmable with a 600 watt low-voltage magnetic dimmer. The dimmer is placed on the line side of the transformer. (Consult dimmer manu fac turer for specifics.)
DIMMING
a transformer may create a buzzing sound, which may be objectionable in some applications. A debuzzing
DIMMING
coil can be purchased separately to reduce the audible noise. OPTIONS Input Wiring: Can be ordered to hard wire to a junction box or to plug in with16 foot power cord with plug. REQUIRED USAGE This transformer provides a single 150 watt output and must be used with a single-feed canopy or other power feed option (sold separately). 12 volt output transformers require the use of 12 volt
LAMP
s.
WEIGHT
8.41 lb./3.81 kg. ±